WESEND MACHINERY
Hydraulic Symmetrical 3-Roll Plate Rolling Machine
The WESEND hydraulic symmetrical 3-roll plate rolling machine rolls metal plate into cylinders of different diameters. It suits workshops handling varied plate sizes and small production batches. A cone rolling attachment is available for conical workpieces.
Product Overview
The symmetrical three-roll layout forms plate by adjusting the upper roll position above the two lower rolls. Model selection starts with the material grade, plate thickness, working width and smallest cylinder diameter required.
Where This Machine Fits
This three-roll plate rolling machine is a practical option when plate thickness, working width and finished diameter change from job to job. It is best suited to small-batch fabrication rather than high-volume production.
Machine Features
- Adjustable rolling diameter. The upper roll position can be adjusted to suit different cylinder diameters. The achievable diameter depends on the material, plate dimensions and selected model.
- Digital position display. A digital readout helps the operator monitor upper roll movement. Numerical positioning functions depend on the machine configuration.
- Rigid construction. A reinforced box-type frame and hydraulic clamping structure help keep the machine stable during rolling.
- Close lower roll spacing. The lower roll arrangement helps with re-rounding. The remaining straight section depends on the plate and rolling conditions.
- Optional cone rolling attachment. Specify cone dimensions and material requirements when requesting this configuration.
What to Check Before Ordering
This symmetrical design does not pre-bend plate ends. If your workpiece requires pre-bending, compare it with an upper roller universal plate rolling machine before choosing a model.
For plate 12 mm thick or below, compare the equipment cost and production process carefully. A hydraulic symmetrical machine may not be the most economical choice. Rolling speed and the work needed to prepare the plate ends also matter when assessing production capacity.
To select a model, send us the material grade, maximum plate thickness, working width, minimum finished diameter and batch size. Include a drawing for cones or other shaped workpieces. These details allow us to check capacity and quote a suitable configuration.
Hydraulic Symmetrical 3-Roll Plate Rolling Machine — Technical Parameters
| Model | Max. Rolling Thickness(mm) | Plate Width(mm) | Upper Roll Diameter(mm) | Main Motor Power(kW) |
|---|---|---|---|---|
| W11NC-25×2000 | 25 | 2000 | 310 | 18.5 |
| W11NC-25×2500 | 25 | 2500 | 360 | 18.5 |
| W11NC-30×2000 | 30 | 2000 | 360 | 22 |
| W11NC-30×2500 | 30 | 2500 | 380 | 22 |
| W11NC-30×3000 | 30 | 3000 | 425 | 30 |
| W11NC-40×3000 | 40 | 3000 | 510 | 45 |
| W11NC-50×3000 | 50 | 3000 | 560 | 55 |
| W11NC-60×3000 | 60 | 3000 | 590 | 75 |
| W11NC-70×3000 | 70 | 3000 | 670 | 75 |
| W11NC-80×3000 | 80 | 3000 | 710 | 90 |
| W11NC-90×3000 | 90 | 3000 | 770 | 90 |
| W11NC-100×3000 | 100 | 3000 | 830 | 90 |
| W11NC-110×3000 | 110 | 3000 | 860 | 110 |
| W11NC-120×3000 | 120 | 3000 | 880 | 110 |
Specifications are subject to change. Please confirm the selected model and capacity for your material, plate dimensions and required rolling diameter before ordering.
Discuss Your Workpiece Requirements
Send your material, dimensions and workpiece drawing. Our team will help select a suitable configuration and provide a quotation.